[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
[ST] RE: (ST) PIAA Light Installation
- Subject: [ST] RE: (ST) PIAA Light Installation
- From: Erik Miner <Axeis@xxxxxxxxxxxxxx>
- Date: Fri, 18 May 2001 16:32:48 -0400
Alex I believe that the PIAA 1100x have a circular pattern.. Of
course I could be wrong :-)
Erik
>
>
>If you look carefully, you will also find that the bulb reflector is in fact
>directional, giving a shaped light path. The lights are designed to be used
>with the letter PIAA horizontal to the ground. If you want to be picky and
>maximize the light pattern when mounting them sideways on the forks, you nee
>to remove the bulbs and grind away a small notch type of thing in the
>housing to allow correct bulb orientation. If you don't do that, the light
>pattern will be spread up and down, as opposed to side to side.
>
>Alex
>
>
>
> * * * * * * * * * * * * * * * * * * *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=