[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Re: high cans
>Though you'll probably need to remove tailpiece plastic for access, the
>minimilist approach would be to only remove the rt. side bag mount
>bracketry: Two bolts on pass. foot peg brkt.; the central bolt (through
>bushings and sleeves - don't loose them) and the bolt into the ft. of the
>brkt. which is held by the t/signal.
If you have the rack, you need to remove it before you can remove the
tailpiece. Next time I install the right bracket, I'm going to make sure
the bolts get installed backwards so they can be removed without taking off
the tailpiece.
Matt Knowles
Aesthetic Design & Photography - www.aestheticdesign.com - (707) 786-4643
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=