RE: [ST] fairing removal

["Strizver, Chris L" <chris.l.strizver@xxxxxxxxx>]

Don,

Its a pretty straightforward operation. You must:

>Remove mirrors. (two bolts each)
>Remove wind screen. (plastic screws, plus the two plastic covers underneath
on either side)
>Unscrew the fairing bolts. The nose attaches in several places, including
into the large side fairings. Just inspect the perimeter of the nose.
>Carefully manhandle the nose out. Its a tight fit. Ensure you found all of
the bolts holding the nose in if there seems too be much resistance.

I think that's everything. I'm typing this from memory though.

- -Chris "Snow Dawg" Strizver

- -----Original Message-----
From: Linda Wood [mailto:lwood1@xxxxxxxxxxxxxxx]
Sent: Sunday, April 28, 2002 12:59 AM
To: ST@xxxxxxxxxxxxxx
Subject: [ST] fairing removal


G'day
Can someone please post the procedure for removal of the nose/screen
assembly surrounding the head lights on my 02 st as I am going to replace
the headlight relays.
Thanks in advance
Don.
Cairns Aus.


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
*
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=