[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

[ST] Re: Torque question



Yes Steve 40nm is correct..  regardless of the type of bolt.



>I wrote, just before hastily hitting the send button:
>
>>In regards to the bolts that hold the front calipers to the forks, 
>>what should they be torqued to? 40Nm?
>
>
>Oops.
>
>Let me clarify something. The FAQ on the Sprint site does indeed say 
>40Nm. However it also says that the bolts in question are Torx 
>bolts. This may have been true on the 99's and/or 2000's but on my 
>2001 they are hex bolts. Logic would dictate that they should be 
>40Nm but my question still stands.
>
>40Nm?
>
>
>
>--
>Steve "Devil Dawg" Lawler
>
>2001 Sprint ST "Blue Devil"
>
>"The Yawkey's are gone. The next significant change will be the 
>lifting of the curse."
>       Me. I said it first!
>
>
>    *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
>     The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>         http://www.TriumphNet.com/st/lilley for more info
>  http://www.TriumphNet.com/st for ST, RS and Mailing List info


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=