[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] valves and such
- Subject: Re: [ST] valves and such
- From: "Jez" <jmjm@xxxxxxxxxxx>
- Date: Sat, 7 Sep 2002 20:35:46 +0100
- -----Original Message-----
From: Tom Emberson <ate_st@xxxxxxxxxx>
To: st list <ST@xxxxxxxxxxxxxx>
Date: 07 September 2002 16:28
Subject: [ST] valves and such
>>
>As far as nits, the book rates the torque of the spark plug coils at 10
>Nm, way too much, in fact two of the bolts stripped the Al.
I agree - I torqued mine up in stages & about 7 - 8 Nm "felt" about right -
10 seems way too high.
>Next time I take the cam cover off, it will be replaced :-( Don't think
>there is enough Al there for a helicoil or such. And might not be worth
>the cost of replacing it to try to fix it.
If I remember correctly the cover is identified as magnesium - could be
pricey to replace
Jez
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=