[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Re: Helmet camera - Zener diode
- Subject: Re: [ST] Re: Helmet camera - Zener diode
- From: "Mike Bostock" <sprint-st@xxxxxxxxxxxxxx>
- Date: Wed, 30 Apr 2003 14:35:20 +0100
In your message regarding [ST] Re: Helmet camera - Zener diode dated
Wed, 30 Apr 2003 19:50:33 +0800, Anderson, Neil G (China) said that
...
>ANG(- Mike,
>ANG(-
>ANG(- An easier way to reduce the output voltage from your 12.5V regulator is
>ANG(- simply to put an ordinary diode (not a Zener) in series between the
>ANG(- regulator output and camera input. A normal diode drops about 07.V when it
>ANG(- is conducting, so the camera will see 11.8V. The diode will need a power
>ANG(- rating of P = VI = 0.7 * 0.130 = 0.091 W, call it 100 milliwatts minimum
Thanks for this..
- --
Mike Bostock
mike@xxxxxxxxxxxxxx
Mid Devon, UK
N50.79155 W3.66646
Wales and SW ST Riders
http://www.sprint-st.org/
'99 Red ST
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=