[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Clutch Cable
- Subject: Re: [ST] Clutch Cable
- From: "2000blueRS" <2000blueRS@xxxxxxxxxxx>
- Date: Sun, 13 Jul 2003 20:47:36 -0500
Inside the leg and tghrough the hole in the motormount.
_________________
Mike the Web Geek
1994 Ducati 900SP, 2001 Triumph RS
Graphic Design, Editing, Web Design
Owner/operator of
www.minnesotasbookstore.com
www.comm.media.state.mn.us/bookstore/centralmail/ (under development)
www.comm.media.state.mn.us/
- ----- Original Message -----
From: "Dennis Griffin" <eagleeye@xxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Sunday, July 13, 2003 8:10 PM
Subject: Re: [ST] Clutch Cable
> Thanks for taking the time to respond. Can you please tell me if your
> cable passes between the fork legs, and the triple clamps, or does it
> pass outside the right leg.
>
> Thanks again,
>
> Dennis
>
> On Sunday, July 13, 2003, at 04:23 PM, 2000blueRS wrote:
>
> > Mine is routed through the opening in the right side motor mount,
> > rearward
> > behind the frame rail, then down to the fitting. The metal tube points
> > up
> > and runs just behind the bodywork bracket.
> >
> > _________________
> > Mike the Web Geek
> > 1994 Ducati 900SP, 2001 Triumph RS
> > Graphic Design, Editing, Web Design
> > Owner/operator of
> > www.minnesotasbookstore.com
> > www.comm.media.state.mn.us/bookstore/centralmail/ (under development)
> > www.comm.media.state.mn.us/
> >
> > ----- Original Message -----
> > From: "Dennis Griffin" <eagleeye@xxxxxxxxx>
> > To: <st@xxxxxxxxxxxxxx>
> > Sent: Sunday, July 13, 2003 3:55 PM
> > Subject: [ST] Clutch Cable
> >
> >
> >> My '00 RS has a clutch cable that has a metal sweep L (~ 45°) at the
> >> lower end where it attaches to the bracket. Would someone with this
> >> same configuration please describe the cable routing and orientation
> >> of
> >> that L bend, or maybe send me a picture? Mine seems to want to point
> >> down before the cable goes back up, so that it passes under the
> >> Triumph
> >> logo on the right side of the engine. Looks goofy. I tried routing it
> >> with the bend pointing up, but there is so much cable that way that I
> >> had to pass it outside the fork legs, and it didn't seem right that
> >> way
> >> either. Looks like later models may have a straight cable, which must
> >> be shorter.
> >>
> >> Thanks,
> >>
> >> Dennis
> >> Scottsdale, AZ
> >> '00 RS, miss me yellow
>
> * * * * * * * * * * * * * * * * * *
*
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=