Re: [ST] Front Sprocket Washer

["Rick & Joyce" <rnjwes@xxxxxxxxxxx>]

> <snip> the part I got... was not the same as the original.
> The original as you noted had 2 or 3 large tabs that you
> folded one over the flat of the nut when done.  The new one
> doesn't have these tabs so I'm not sure how it works.  I
> ended up reusing the original.

With the 'old-style', tabbed washer (p/n 1180180-T0301), the
second, unused tab doesn't always line up with a flat on the nut.
Reuse may require folding the tab over the corner between the
flats.  With the new round washer, one simply folds a segment of
the circumference against one of the flats on the countershaft
nut.  While not recommended, this washer could probably be
reused several times.

> PS: 18/43 gearing rocks!

If you want to really rock, try 17/43 (or 18/45  ;o)
- --
Rick in Oregon
'01 Sprint ST




     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=