Re: [ST] for George - GenMar risers

[Neale Parker <neale.parker@xxxxxxx>]

Hi George,
			would you share the response form Gen-Mar please. I also will look at 
bending the sub-frame.

Cheers

Neale

George wrote:
> Thanks for the input!  I already added the ZG screen and am very pleased 
> with it!  There were a few other suggestions that I'm going to look into 
> tonight or tomorrow.  I actually got a response from GenMar earlier 
> today too.
> 
> George
> 
> At 12:05 PM 3/14/2003 , don draper wrote:
> 
>>  >>> I finally found time to mount them GenMars).  Things didn't go
>> as smoothly as I had anticipated.  The riser went on fine BUT the
>> throttle cables were a little tight. <<<
>>
>>      I replaced both throttle and brake cables on mine (from
>> Trophy,... I think,... it was three years ago)
>>
>>  >>> And if I turned the bars full left to lock the throttle cables
>> at the housing contacted the underside of the windscreen support.  IN
>> fact they moved the support about 1/2 inch at full lock. <<<
>>
>>     Yeah,... fortunately the windscreen and subframe are both quite
>> flexible I bent the subframe out enough to provide clearance (didn't
>> measure it but it must have been about a half-inch or more) and did
>> the same on the left side so the screen didn't look cockeyed from the
>> front.
>>
>>  >>> I also have heated grips but I don't think that really matters.
>> <<<
>>
>>     On my bike the throttle housing HAD to retain it's original
>> position to accommodate the heated grips.
>>
>>     I consider the GenMars the most important of all the
>> modifications I've made in the three years I've had the bike.  The
>> stock bars are not only too low (for me) but they're also at an odd
>> angle (for the human hand).  With the GenMars, you may find you want
>> a taller screen.  Many of us have had good luck with Zero Gravity
>> screens.
>>
>>                                           doggydoo   - - - o&\o
>>
>>      *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   * 
>> *   *
>>       The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>>           http://www.TriumphNet.com/st/lilley for more info
>>    http://www.TriumphNet.com/st for ST, RS and Mailing List info
> 
> 
> 
>     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   
> *   *
>      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>          http://www.TriumphNet.com/st/lilley for more info
>   http://www.TriumphNet.com/st for ST, RS and Mailing List info


- -- 
  ._O_.   Neale Parker
/_\o/_\  Sun Microsystems Australia Pty Ltd
   /H\    Phone:-  x59682 / 61 2 9466 9682
  (=O=)   Fax:- 61 2 9844 5161
    U     email:- neale.parker@xxxxxxx


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=