[ST] RS mirror extensions

[Darren <rs955i@xxxxxxx>]

Over the winter I have been working on some mirror extensions for the RS. I
used 1 inch thick plastic and cut it on a
bandsaw to the shape of the mirror base. I then need to extend the studs
that come out of the base of the mirror,so
I took some 10mm solid steel rod and drilled a hole in the center and tapped
it to M6 x 1 thread . I then cut the
rod into 1 inch lengths (same size as the plastic spacers) and threaded them
on to the mirror studs with some
locktite. I then made some 1 inch studs (from bolts) and treaded them into
the other end of the steel rods.
and bolted them on the bike. They look o.k on the bike, can't really tell
they are not factory. I dont have
a ride report yet as the rods are still a little on the icy side here. I
have some pictures at the link below that
will help clear up my instructions.

http://members.shaw.ca/rs955i/mirror/

Darren
01 RS Lucifer Orange
Edmonton Canada


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

End of st-digest V2002 #898
***************************


 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                      End of Triumph ST/RS Digest
            ST/RS Digest is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

          This digest Copyright 1999-2002 TriumphNet.com