[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re[4]: [ST] Question on gearing
- Subject: Re[4]: [ST] Question on gearing
- From: Keith Winter <kwinter@xxxxxxxxxxxx>
- Date: Mon, 26 May 2003 10:41:25 -0700
Well, apparently, it's isn't going to matter, at least for
the time being. No matter how much force I apply to my 18"
break down bar, I cannot loosen the nut; even with a 24"
extension (pipe) added, it won't budge. It is on so tight
that the rear brake cannot apply enough force to keep the
wheel from turning while I try to loosen the nut. Whoever
put this thing on must have used an air impact wrench. I
guess it means a trip to the dealer (>100 miles away) to get
the sprocket changed. :-(
- -Keith
On Monday, May 26, 2003, 10:07:22 AM, Rick & Joyce wrote:
> Regardless of the tooth count, the undamped aftermarket
> countershaft sprockets (those without the black rubber center
> donut) are somewhat noisier. I wouldn't let that deter me from
> making the switch though...and the factory sprockets are more
> expensive.
> --
> Rick in Oregon
> '01 Sprint ST
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=