Re: [ST] Front Wheel Removal

[Keith Winter <kwinter@xxxxxxxxxxxx>]

Garry,

It is indeed a 19mm hex key that is required to remove the
axel.  I purchased one from somewhere but don't remember now
where that was.  You can fake it with a 3/4" or 19mm bolt
with two 3/4" or 19mm nuts threaded on and locked together.
Then you can use a 3/4" or 19mm wrench to turn the axel. (I
hope that description was at least partially clear...).

- -Keith
'00 RS

On Sunday, November 16, 2003, 10:15:43 AM, Garry Simmons wrote:

> It appears to be a 3/4" (19mm?) allen key or something. So
> what do I need to buy on my next trip to the hardware
> store? You'd think Triumph would at least provide the
> tools required to get the wheels off the bike in the tool
> kit.




     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=