[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Fork Seal Questions
This is a multi-part message in MIME format.
- --Boundary_(ID_59SaR2UYQKUCv4WTuV7xPQ)
Content-type: text/plain; charset=us-ascii; format=flowed
Content-transfer-encoding: 7BIT
Thanks again, George.
This will be the first time that I've replaced fork seals. If you have
the time, would you be so kind as to either point me to a place where
they explain the steps, or explain how you use the PVC. I have all the
service manuals, but still am a bit confused.
Regards,
Ira
George K wrote:
> I use a piece of PVC pipe that I've split open. Some light taps from
> a rubber mallet have work wonderfully in the past.
>
> George
>
>
> At 02:34 PM 12/24/2004 , Ira Gluck wrote:
>
>> Thanks Don,
>> Do you think that I'm better off getting the dedicated Triumph tool?
>> Have a Happy,
>> Ira
>>
>> Dkamest110@xxxxxxx <mailto:Dkamest110@xxxxxxx> wrote:
>>
>>> Greetings Ira,
>>> The outside diameter of the Triumph tool(3880080-T0301) where it is
>>> used for the seal/dust seal installation is 54.53mm. The inside
>>> diameter is 43.4mm and is stepped out to a diameter of 48.25mm the
>>> last 5.8mm .
>>> Hope this helps.
>>>
>>> Don Kames
>>> 03 ST
>>
- --Boundary_(ID_59SaR2UYQKUCv4WTuV7xPQ)
Content-type: text/html; charset=us-ascii
Content-transfer-encoding: 7BIT
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Thanks again, George.<br>
This will be the first time that I've replaced fork seals. If you have
the time, would you be so kind as to either point me to a place where
they explain the steps, or explain how you use the PVC. I have all the
service manuals, but still am a bit confused.<br>
Regards,<br>
Ira<br>
<br>
George K wrote:<br>
<blockquote
cite="mid4.2.0.58.20041225101434.00b43ef8@xxxxxxxxxxxxxxxxxx"
type="cite">I use a piece of PVC pipe that I've split open. Some
light taps
from a rubber mallet have work wonderfully in the past.<br>
<br>
George<br>
<br>
<br>
At 02:34 PM 12/24/2004 , Ira Gluck wrote:<br>
<blockquote type="cite" cite="">Thanks Don,<br>
Do you think that I'm better off getting the dedicated Triumph tool?<br>
Have a Happy,<br>
Ira<br>
<br>
<a href="mailto:Dkamest110@xxxxxxx";>Dkamest110@xxxxxxx</a> wrote:<br>
<blockquote type="cite" cite=""><font size="2">Greetings Ira,<br>
The outside diameter of the Triumph tool(3880080-T0301) where it is
used for the seal/dust seal installation is 54.53mm. The inside
diameter
is 43.4mm and is stepped out to a diameter of 48.25mm the last 5.8mm
.<br>
Hope this helps.<br>
<br>
Don Kames<br>
03 ST</font></blockquote>
</blockquote>
</blockquote>
</body>
</html>
- --Boundary_(ID_59SaR2UYQKUCv4WTuV7xPQ)--
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=