[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] RE: Clutch conversion



Derek,

The handlebar master cylinder used looks like an AJP unit used on Gas 
Gas trials bikes among others.  The unit at the clutch looks like it may 
be off a Gas Gas enduro model.
A dealer list can be found here
http://www.gasgas.com/Pages/Dealers/Dealer-list.html

Don't know if that helps .. 

Dave Bardell
MillerSTown, PA

Derek Randles wrote:

>John, thank you for the insight. After reading your email, I searched t595
>and found this link:
>
>http://www.ibb.net/~anne/HEBO/HTML/
>
>I am gonna check out the options. As for my bike, it is a 2000 with only
>6300 miles. The clutch seems to have a long travel before it engages. I
>wanted to assure it was engaged and not dragging when the lever is pulled. I
>assume the plates do not separate by much even when engaged. I thought a new
>cable may have solved some of the issues, it has not. Still fairly difficult
>to pull. Not hard to pull, but it does not have the same pull as hydraulic
>which I am used to.
>
>Thanks for your input. Maybe a few more miles will help the bike break in a
>little.. I believe the first 5000 miles were a very easy life on the bike,
>now that I have it, no more Mr. Nice Guy.. Muhahhahahaha.
>
>Derek
>
>
>
>
>     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
>      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>          http://www.TriumphNet.com/st/lilley for more info
>   http://www.TriumphNet.com/st for ST, RS and Mailing List info
>
>
>  
>



     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=