[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

RE: [ST] Front Wheel Installation



Thanks guys,
I think what I did was orient the speedo drive cable straight up instead
of out the back. I did notice both notches in the speedo drive but
thought the notch oriented with the cable pointing up was the correct
way!
This is great. Thanks to all for your advice.

Alan... 

- -----Original Message-----
From: owner-st@xxxxxxxxxx [mailto:owner-st@xxxxxxxxxx] On Behalf Of Kurt
Windisch
Sent: Friday, March 12, 2004 10:13 AM
To: ST@xxxxxxxxxxxxxx
Subject: RE: [ST] Front Wheel Installation

- --- Dan Wallander <triumph99@xxxxxxxxxxxxx> wrote:
> The speedo drive should be located so that the cable exits the drive 
> at right angles to the fork and facing to the rear of the motorcycle, 
> make certain the tangs on the inside of the drive match the grooves.

It took me a while to get this part right last time since the speedo
drive has two sets of tabs. If you line up the wrong tabs on the fork
tang (with the cable pointing up not back), then it may look right but
will be very difficult to fit the wheel and axle.
Mabye if it was forced you would get drag like you're experiencing.

My suggestion (based on past mistakes) is to read Dan's description
above very carefully and verify that you have it oritented right (along
with all the other detailed comments).


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you're looking for faster
http://search.yahoo.com

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
*   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info




     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=