Re: [ST] Body interchangebility

[Neil Lindsey <NeilLindsey@xxxxxxx>]

wasn't Jack referring to putting 'old' ST skins on an '05 ST 1050?

Neil

- ----- Original Message ----- 
From: "CAPT Howard S. Serlick USNR" <serlick@xxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>; <rude@xxxxxxxxxxxx>
Sent: September 8, 2004 10:54 AM
Subject: [ST] Body interchangebility


> Hello Jack and all:
> I can tell you with certainty that virtually all body 
> parts will interchange with all ST models with TWO 
> EXCEPTIONs:
> 1. Left central (main) fairing panel from '99>'01 will 
> fit a newer model ST '02>present IF YOU CUT OUT the 
> portion where the water pump sticks out at the lower 
> rear edge. All holes for mechanical connectors to other 
> fairing parts match perfectly.
> 2. Left belly pan also needs to be modified to 
> accommodate the pump housing as above. All holes for 
> connectors match corresponding parts perfectly.
> I have several custom modified and painted parts from 
> my '00 ST. When I purchased my new '03 earlier this 
> year, I made a template from the '03 left fairing/belly 
> pan parts and transferred them to the old parts. I cut 
> and sanded the parts, touched up the paint/clear. The 
> parts fit exactly.



     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=