[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Valve spec assistance needed 02 Sprint ST
- Subject: Re: [ST] Valve spec assistance needed 02 Sprint ST
- From: Justin <JPsMac@xxxxxxxxxxxxxxx>
- Date: Sun, 26 Sep 2004 12:01:53 -0700
On 9/26/04 6:18 AM, "David Pullen" <dpullen@xxxxxxxxxxx> wrote:
> My '02 and later service manual says 0.10-0.20mm intake, and 0.20-0.30mm
> exhaust.
>
> - Dave
Dave,
Thanks for the reply and the virtual thump to the head. It never really
dawned on me until I read your reply that I was using the wrong unit of
measure. I just couldn¹t figure out why all my valves were consistent to
each other but would have been so far out of range.
Intakes were at .007in(.178mm)
Exhaust were at .010in(.254mm)
Justin
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=