Re: [ST] RS/ST Lift handle

[Neil Lindsey <NeilLindsey@xxxxxxx>]

Ummm Howard,

A direct quote from the 'Luggage Fitting Instructions - Sprint ST':

"5 .  At the left side of the motorcycle, undo the two M8 bolts securing
the lifting handle.  Remove the seat lock assembly from the handle and
detach from the lock.  Remove the lifting handle.  Retain (for reuse)
the two M8 bolts and the lock mechanism with its securing screws.

6.  Assemble the replacement lifting handle from the supplied kit, as
shown below."

The handle referred to in 5. is the solid metal piece that runs between
the seat lock and the footpeg bracket, parallel to the bodywork.  The
replacement is the one with the swivel handle.

Neil


- ----- Original Message -----
From: "CAPT Howard S. Serlick USNR" <serlick@xxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: February 8, 2005 5:40 AM
Subject: [ST] RS/ST Lift handle


> All:
> The lifting handle on the ST is relocated, not removed when the
panniers are installed.
> Thus, the handles are not discarded, but moved slightly forward and a
bit lower on the bike.




- -- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.6 - Release Date: 2/07/05


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=