[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Pass switch
The images have been uploaded here
http://www.pbase.com/howlindawg/autocom_ptt_mod
The first image shows the switch housing dismantled after having a slot cut
into the side to allow for the new wiring.
The nylon grommet protects the cable.
The second image shows the top half of the housing which has been drilled
and has had a waterproof cover added to protect the three way toggle switch.
A little RTV silicon sealant helps the seal.
The third image shows the Pass switch removed from the housing, ready to be
soldered to the new wiring.
The fourth and fifth images show the Pass switch soldered up to act as the
PTT and the three way toggle switch which selects VOX/PTT/TX modes.
The final image shows the reassembled switchgear.
The toggle is fixed into the top of the housing using a hot glue gun.
HTH,
Howlin'
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com