[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re:[ST] 99 Sprint ST fault codes and Idle or stalling problem. continued
- Subject: Re:[ST] 99 Sprint ST fault codes and Idle or stalling problem. continued
- From: Frederic.Nizery@xxxxxxxxxx
- Date: Wed, 15 Jun 2005 11:32:51 +0200
...continued.
have a look here:
http://www.obd-codes.com/trouble_codes/index.php
P0113 is intake temp sensor hight input:
you have a hight voltage on this input (1/D1 1/E4 of the ecu connector).
As there is certainly a pull up resistor
on this input, you most probably have it hight impedance (disconnected).
A normal sensor should
(depending on the temp) show between 6.1kOhm and 1.6kOhm. Don't check
the impedance w/o disconnecting the ecu.
You could damage the input buffer. Check directly on the sensor, after
disconnecting it and check for continuity of wires,
ecu disconnected. Be cautious and carefull. I would suggestion asking
help from a fellow w/ some electronic knowledge
if you'r not comfy w/ the manip.
P0105 is Manifold Absolute Pressure/Barometric Pressure Circuit
Malfunction. This is the sensor located
inside the ECU (CPU). This one doesn't appear in the workshop manual. I
don't really imagine this one failing
as it is directly in the ECU. I had a look a while ago in the datasheet
of the maker indicating that most of the time
it's soldered on the pcb. That's the way they are conceived. I would
suggest the hose is missing or disconnected
or leaking.
I will have a look at the fault code for confirmation about what you
ay. I don't have that on the top of my head. It seems
one of the two is familiar though.
Fred 02 ST BRG
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com