Re: [ST] I've Lost That Rubbin Feeling...

[<dbardell@xxxxxxxxxxxxxx>]

Garry,

I have cleaned pads with a piece of emory cloth and a 
piece of plate glass.  Place emory paper on glass and rub 
the pad on it.  Spray clean with brake cleaner and try it. 
 Unless pads are saturated with fluid, etc.,  it should 
help.

Dave Bardell

On Tue, 9 May 2006 8:59:52 -0400
  garrysimmons@xxxxxxxxxxxx wrote:
>---- drbrant@xxxxxxxxxxxxxx wrote: 
>> How are you cleaning the pads and calipers?
>
>I just loosen the pad retaining pin, then remove a 
>caliper. Unscrew the retaining pin and the pads fall out. 
>Spray pads with brake cleaner and wipe clean with a rag. 
>Spray calipers around the pistons with brake cleaner. 
>Wipe with a rag. Carefully pump brake lever to get 
>pistons to move. Clean some more. Push pistons back in. 
>Clean some more. Usually a piston or two will be a little 
>sticky and I'll need to hold the others in in order to 
>get the sticky piston to move so it can be cleaned. Then 
>reassemble the mess being sure to lube the retaining pin 
>with some copper slip/brake lube and move on to the next 
>caliper...
>
>I'm wondering if something like using emory cloth on the 
>pads would restore the grip, or if cleaning the rotors 
>somehow would help (never touched the rotors). I've got 
>40K+ miles on the bike and wouldn't say I use the brakes 
>hard. I put the current pads on about a year ago (15K 
>miles) before a couple track days.
>
>I have a fresh set of EBC HH pads for the front waiting 
>to go, but it seems like such a waste since the existing 
>pads have lots of life left in them. No where close to 
>being worn out, yet the stopping power is significantly 
>reduced.
>
>Garry
>
>_______________________________________________
>Triumph Sprint ST/RS mailing list
>Send list posts to ST@xxxxxxxxxxxxxx
>Change your list options at www.Triumphnet.com

_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com