[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: RaceTech
Garry: Mine are setup with the recommended ( by Racetech in the
installation guide) initial preload and I have the adjusters out
about 8mm above the cap. I can measure exactly how much the adjusters
are out if you need to know.
Erik
>Question to anyone who has installed the springs (.95 kg/mm) and
>emulators on their Sprint...
>
>What is your total preload on the spring in mm's? That is, the
>preload when the cap was installed as well as any additional preload
>you added with the adjusters.
>
>Garry
>bird@xxxxxxx
>
>
> * * * * * * * * * * * * * * * * * * *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=