[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
RE: [ST] Oil filter removal
- Subject: RE: [ST] Oil filter removal
- From: "Rick & Joyce" <rnjwes@xxxxxxxxxxx>
- Date: Tue, 31 Aug 2004 19:15:15 -0700
> Does anyone know what diameter the NEW filter is?
The older filters measure 66.3mm across the flutes of which there are
14. I'd guess they're considered to be 67mm.
The newer ones measure 64mm and also have 14 flutes
There are a number of sources for 65mm cap wrenches which should fit the
64mm filter. KD Tools makes one (KD3253) which should be available at
auto parts houses:
http://www.mytoolstore.com/kd/kdfilt03.html
I haven't used one but Snap-On's FW656714 at $10.60 may be your best
bet. They claim it will fit both 65 & 67mm sizes. Check it out at:
http://tinyurl.com/3jmny
Rick in Oregon
'01 Sprint ST
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
End of st-digest V2004 #473
***************************
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End of Triumph ST/RS Digest
ST/RS Digest is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
This digest Copyright 1999-2002 TriumphNet.com