Re: Aux. Power Socket

["Mike Bostock" <mike@xxxxxxxxxxxxxx>]

In your message regarding Aux. Power Socket dated Thu, 4 Jan 2001 07:54:47
- -0800, Keith Winter said that ...

>KW-  Also, where is one mounted, generally?  As you know, with the 
>KW-  RS, there is little in the way of "dash board" area, so I'm 
>KW-  guessing it will have to be installed in one of the upper flat areas 
>KW-  of the fairing, maybe on the opposite side from where the heated 
>KW-  grip switch was installed.

I have just requested the RAM Handlebar mount from
http://www.cycoactive.com/gps/gps_mounts_ram.html#gr3h with a view to using
longer allen bolts on the clutch lever mounting and putting it there.  The
other way shown, on the ST at least, is to use the tank bolt so I have
ordered one of the diamond bases just in case.

I shall initially use the aux power socket on the ST but maybe hard-wire it
in later by piggy-backing onto the aux wiring.

I'll let you know how I get on.  

<tongue in cheek mode on>
Still got a problem with the waterproof mount for the PC and the HUD
projector ;-)
<t.i.c. mode off>
- -- 
Mike Bostock
mike@xxxxxxxxxxxxxx
http://www.toothfairy.co.uk/

'99 Red ST

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=