RE: Left hand switch cluster

["Anderson, Neil G" <AndersNG@xxxxxx>]

Jim Gillespie <jim@xxxxxxxxxxxxx> wrote:

> How on Earth does the left hand switch cluster go back together?!
>    The problem seems to be the wire to the heated grip.  I could only
> see two possible routings; one fits badly and the other is much worse.

The heated grip cable needs to be routed in the channel along the underside
of the bar.  When I fitted my grips I found the easiest way was to tie a
piece of string around the cable & bar just to the right of the switch
cluster, to hold the cable in place while the cluster is reassembled.
Shouldn't need a lot of force - if it does, you may have pinched a wire in
there somewhere.

Hope that helps,

Neil

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=