[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] rear tire nut
Hi Wes,
I didn't plan to use the impact to tighten only to loosen. I have the
150ft/lb Craftsman torque wrench for tightening. Anyone else out there use
an impact to remove the nut before? Does it damage the nut? Inquiring
minds....
Zac
------------------------------------------------------------
Free Web Email & Filter Enhancements.
http://www.freewebemail.com/filtertools/
------------------------------------------------------------
- ----- Original Message -----
From: "Wesley Horner" <wesman@xxxxxxxxxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Tuesday, June 26, 2001 6:52 PM
Subject: Re: [ST] rear tire nut
> > The nut size for the rear wheel is 46 mm. I bought a 1-13/16" socket
which
> > fits and should work. I have yet to get the nut off though. I will
attempt
> > to use an impact wrench on the next go around.
>
> Hmm I don't know that I would use an impact wrench. I got it off with a
> large socket wrench. It was longer than the radius of the tire and didn't
> require too much straining. I bought the largest torque wrench the
hardware
> store had (up to 150lb/ft) and it was easy to torque up.
>
> wes
>
> --
> ~~~~wesman@xxxxxxxxxxxxxxxxxx~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Vax a vicious creature known to eat 110AC and quotes through its
> *DCL*. Vax are usually found in groups of Vaxen called clusters where
> they lay in wait to ravage their prey known as users.
>
> * * * * * * * * * * * * * * * * * *
*
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=